詳細介紹
DRK-810深孔槍鉆切削油DRK-810 deep hole gun drilling cutting oil
本產品針對深孔槍鉆加工的特點，采用國內*配方，以合成油精制礦物油為基礎，添加多種功能添加劑，用特殊生產工藝精制而成。
This product for deep hole gun drill processing, using the domestic advanced formula, using synthetic oil refined mineral oil as base, adding a variety of functional additives, special production process and refined
產品特性：
1.安全性好，對人和環境無不良影響。
2.優良的防銹性、潤滑性和極壓性，加工精度高。
3.本品含有高滲透性潤滑劑，降低摩擦阻力及操作負荷。
4.延長刀模具的使用壽命，減少槍鉆頭磨損斷裂。
5.粘度合適且長時間保持不變，揮發性小，穩定性高。
6.油品流動性好，排屑快，清洗性好。
7.油品抗氣霧性能優良，油料消耗較少，使用成本較低。
Products characteristics:
● good safety, no adverse effects on people and the environment.
● antirust, lubrication and extreme pressure, high precision machining.This product contains high permeability lubricant, reducing friction and the operating load.
● extend knife die life, reduce the gun drill wear fracture.
● suitable viscosity and long time constant, low volatility, high stability.
● oil has good fluidity, fast chip removal, cleaning and good.The excellent performance of anti fog oil, fuel consumption is less, the use of low cost。
產品用途：適用于不銹鋼、鋁合金、碳鋼、鑄鐵等各種材質工件的深孔槍鉆、深孔鏜的切削加工。
Product use: machining deep hole gun is applicable to stainless steel, aluminum alloy, steel, cast iron and other materials of drilling, deep hole boring of workpiece.
技術指標(qualification ):
| 項目（project item） | 質量指標（qualitative index） | 試驗方法（experimental method） |
| 外觀（exterior） | 琥珀色液體(Amber liquid) | 目測（visualization） |
| 運動粘度（kinematic viscosity）mm2/2、40℃ | 12~16 | GB/T265 |
閃點開口(Flash point opening)/℃ | ≥150 | GB/T267 |
腐蝕/鋼片（Corrosion?/?steel?sheet）50℃，3h | 合格（qualified） | GB/T378 |
注意事項：密封儲存，防止日曬、雨淋或混入雜質，嚴禁與其他油品混用。
包裝及儲運：200升國標桶包裝，凈重170公斤/桶。
Note: sealed storage, to prevent the sun, rain or impurities, is strictly prohibited and other oil mixture.
Packing and storage: 200 liters GB drum, net weight 170 kg / barrel..
