特點：

1.在電腦銑床 / 車床上設定刀長用。

2.測量高度：50.00±0.005mm。

3.彈簧力較小，可避免小銑刀或鑽頭斷裂。

4.用研磨過的平行板即可簡單設定。

5.可用4mm之六角板手調整測臺高度。

6.可用2.5mm之六角板手調整指針歸零。

7.新型Z軸設定器出廠時已經校正設定完成，下刀行程是1mm，客戶使用起來更方便。

Feature：

1. Computermilling / lathe set the knife long with.

2. Measuringheight：50.00±0.005mm.

3. Small springforce to avoid small cutter or drill fracture.

4. Groundparallel plate can be easily set.

5. The available4mm hex wrench to adjust the measured height.

6. Available 2.5mmhex wrench to adjust the pointer to zero

7. New Z-axis setter factory hascorrection setting is completed. Under the knife stroke is 1mm customers to usemore convenient.