短型，高速，輕量型回轉油壓缸。
安裝時可由后端鎖固之。
For short form.lighe weight and high speed rotary cylinder.
Can screw it from the rear end of the cylinder when mounting.
淺油孔配管務必單獨接回油壓槽，以避免產生背壓。
The drain port should be independently connectde to oil tank to avoid back pressure.
尺寸單位/Size unit: mm
| 規格 Spec 型號 Model | 活塞面積 Piston area cm2 押側Extend | 活塞面積 Piston area cm2 拉側Retract | 活塞行程 Piston stroke mm | 轉速 Max RPM | 使用壓力 Max.Operating Pressure Mpa(kgf/cm2) | 慣性矩 I kg*m2 | 重量 Weight kg |
|---|---|---|---|---|---|---|---|
| SNK-75 | 44.2 | 37.1 | 15 | 6000 | 4.0(40) | 0.01 | 2.8 |
| SNK-100 | 78.5 | 71.5 | 20 | 6000 | 4.0(40) | 0.03 | 4.3 |
| SNK-125 | 122.7 | 113.1 | 25 | 5500 | 4.0(40) | 0.05 | 6.8 |
| SNK-150 | 176.7 | 160.8 | 30 | 5500 | 4.0(40) | 0.09 | 9.4 |
| SNK-200 | 314.1 | 290.4 | 35 | 5500 | 4.0(40) | 0.28 | 15.3 |
| SNK-250 | 469.1 | 436 | 60 | 2000 | 5.0(50) | 0.4 | 45.2 |
| 規格 Spec 型號 Model | A | B | C | D1 | D2 | E H7 | F | G Max | G Min | H | J | K | L | L1 | L2 | M | N | P | Q | R | S |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SNK-75 | 75 | 15 | 107 | 90 | 90 | 65 | 30 | 45 | 30 | 57 | 148 | M20×2.5 | 6~M8×16 | M8×60 | 12 | 21 | 35 | 28 | 10 | 27.5 | 26 |
| SNK-100 | 100 | 20 | 132 | 115 | 100 | 80 | 30 | 45 | 25 | 72 | 163 | M20×2.5 | 6~M10×20 | M8×75 | 12 | 21 | 35 | 26 | 10 | 28.5 | 32 |
| SNK-125 | 125 | 25 | 160 | 140 | 130 | 110 | 35 | 50 | 25 | 82 | 172 | M24×3.0 | 6~M12×20 | M8×85 | 12 | 25 | 45 | 26 | 10 | 28.5 | 32 |
| SNK-150 | 150 | 30 | 190 | 170 | 130 | 110 | 45 | 55 | 25 | 95 | 184 | M30×3.5 | 12~M12×24 | M10×100 | 16 | 32 | 45 | 26 | 10 | 28.5 | 32 |
| SNK-200 | 200 | 35 | 245 | 220 | 145 | 120 | 55 | 70 | 35 | 115 | 201 | M36×4.0 | 12~M16×30 | M10×125 | 21 | 38 | 60 | 60 | 6 | 28.5 | 32 |
| SNK-250 | 245 | 60 | 307 | 275 | 220 | 160 | 65 | 85 | 25 | 165 | 255 | M42×3.0 | 12~M20×35 | M16×175 | 28 | 45 | 65 | 65 | 18 | 6 | 28 |
