產品特點：
該機屬于液壓型三輥卷板機，用于常溫狀態下將板材卷成圓筒形、圓弧形、圓錐形。上輥可以垂直移動、水平移動。
預彎通過上輥水平移動，使上輥相對于下輥呈非對稱位置來實現。
滾圓時通過電動機、減速機帶動兩下輥進行。由于下輥的標高不變，所以便于進料和操作。翻倒架采用液壓翻倒。
技術參數：
| W11S Series upper roller universal plate rolling machine | |||||
| specification | Max.rolling sheet thickness (mm) | Max.pre-bending sheet thickness (mm) | Max.rolling sheet width (mm) | Diameter of up roller (mm) | Motor power (KW) |
| W11S-12*3000 | 12 | 3000 | 9 | 290 | 11 |
| W11S-16*2000 | 16 | 2000 | 12 | 260 | 11 |
| W11S-16*2500 | 16 | 2500 | 12 | 300 | 15 |
| W11S-16*3000 | 16 | 3000 | 12 | 320 | 15 |
| W11S-20*2000 | 20 | 2000 | 16 | 300 | 15 |
| W11S-20*2500 | 20 | 2500 | 16 | 330 | 22 |
| W11S-20*3000 | 20 | 3000 | 16 | 380 | 22 |
| W11S-25*2000 | 25 | 2000 | 20 | 410 | 15 |
| W11S-25*2500 | 25 | 2500 | 20 | 438 | 30 |
| W11S-25*3000 | 25 | 3000 | 20 | 410 | 37 |
| W11S-30*2000 | 30 | 2000 | 25 | 380 | 30 |
| W11S-30*2500 | 30 | 2500 | 25 | 410 | 30 |
| W11S-30*3000 | 30 | 3000 | 25 | 450 | 37 |
| W11S-30*4000 | 30 | 4000 | 25 | 550 | 45 |
| W11S-40*2000 | 40 | 2000 | 32 | 410 | 37 |
| W11S-40*2500 | 40 | 2500 | 32 | 500 | 45 |
| W11S-40*3000 | 40 | 3000 | 32 | 550 | 55 |
| W11S-40*4000 | 40 | 4000 | 32 | 630 | 55 |
| W11S-50*2500 | 50 | 2500 | 40 | 580 | 55 |
| W11S-50*3000 | 50 | 3000 | 40 | 620 | 75 |
| W11S-50*4000 | 50 | 4000 | 40 | 700 | 75 |
| W11S-60*2500 | 60 | 2500 | 60 | 650 | 75 |
| W11S-60*3000 | 60 | 3000 | 60 | 710 | 75 |
| W11S-60*4000 | 60 | 4000 | 60 | 780 | 90 |
| W11S-70*2500 | 70 | 2500 | 60 | 700 | 75 |
| W11S-70*3000 | 70 | 3000 | 60 | 740 | 90 |
| W11S-70*4000 | 70 | 4000 | 60 | 770 | 90 |
| W11S-80*2500 | 80 | 2500 | 70 | 730 | 75 |
| W11S-80*3000 | 80 | 3000 | 70 | 770 | 90 |
| W11S-80*4000 | 80 | 4000 | 70 | 880 | 90 |
| W11S-100*2500 | 100 | 2500 | 90 | 820 | 90 |
| W11S-100*3000 | 100 | 3000 | 90 | 880 | 110 |
| Because in the continuous improvement of products, if there is difference between this date and technical data, should comply with the technical agreement parameters on both sides. No further notice! | |||||
