機床商務網
公司動態
磁性分離器廠家提供結構原理與使用安裝中英文說明
閱讀：1070 發布時間：2019-1-7一、磁性分離器結構原理
磁性分離器由減速器和磁輥兩大部分組成。減速器是通過鏈條帶動磁輥轉動,磁輥內裝有*強力磁鐵,冷卻液中的鐵屑吸附在磁鼓套表面,壓輥將鐵屑中的冷卻液擠壓出去,并流回液箱,鐵屑被刮板刮掉后排入污物箱。
STRUCTION：The magnetic separator is consisted of reduction and magnetic roll. Reductions drive the magnetic roll by chain. The magnetic roll with many pieces of permanent magnetic can attract iron particle from cool liquid and make iron particles on the surface of it. Cooling liquid contained in iron fillings is then extruded out by press of magnetic roll and return to liquid tank . Iron filling scraped by rubber fall into dirt box.
二、磁性分離器使用安裝
1、磁性分離器的流量應根據機床水泵流量選定,兩者應相一致。
2、運行中,磁輥的轉向應按磁性分離器廠家說明書箭頭所示。
3、膠輥的松緊調整適當,用來擠壓鐵屑中的水分。
4、刮板的位置也可調整,不要與磁輥靠的太緊,用來刮除磁輥上的鐵屑。
OPERATION AND INSTALLTION：
1、The flow capacity of the magnetic separator should be selected according to the flow capacity of pump, the both are asked to be same.
2、In operation, the direction of the magnetic roll's rotation should accord with arrow . 3、Tightness of rubber pressing magnetic roll is adjustable to press water contained in iron filling.
4、The position of scraping board is adjustable not too close to magnetic roll, to scrape iron filling on the surface of magnetic roll.