JK2M2208

兩相混合式步進電機驅動器

2phase hybrid stepper motor driver

概述

JK2M2208 兩相混合式步進電機驅動器，采用交流110V~220V，適合驅動電流小于8.0A,外徑在110mm,130mm的混合式步進電機使用。電機低速運行平穩，高速力矩穩定。廣泛適合于各類CNC機械，機器人，切割機，包裝機，繪圖儀，雕刻機等，

Descriptions

JK2M2208 is a type of 2 phase hybrid steppermotor driver , this driver input voltage is 110V~220V AC . suit for currentless 8.0A, diameter is 110mm ,130mm 2 phase hybrid stepper motor . the motorrun smoothly. It is widely used in CNCmachine , robots,cutting machine,packing machine,plotter, engraving machine andso on.

特點

*平均電流控制，兩相正弦電流輸出

*交流110V~220V

*光電隔離信號輸入、輸出

*有過壓-﹑欠壓-﹑過流-﹑相間短路保護功能

*十六檔細分和自動半流功能

*十六檔輸出相電流設置

*可驅動任何8.0A相電流以下兩相、四相混合式步進電機,

*主要適合驅動110mm和130mm兩相步進電機

Features

*Averagecurrent control,2 phase sinusoidal output current drive

*supplyvoltage from 110VAC~220VAC

*Opto-isolatedsignal I/O

*Overvoltage,under voltage,overcurrent,phase short cicuit protection

*16channels subdivision and automatic idle-current reduction

*16channels output phase current setting

*Can drive 2 phase and 4phase hybrid stepper motor when phase current less than 6.0A

*mainlyfor 110mm and 130mm 2 phase stepper motor

性能指標

輸入電壓 交流110V~220V

輸出電流 0.5A~8.0A

溫 度 工作溫度-10°~45°，存放溫度-20°~125°

環境濕度 不凝露，不結霜

氣 體 禁止有可燃?xì)怏w和導電灰塵

重 量 1700克

MechanicalSpecification

Input Voltage 110~220V AC

Output current 0.5A~8.0A

Temperature working temperature -10°~45°,stockingtemperature ~20°~70°

Humidity Not condensation , no water droplets

Gas Prohibition of combustible gasesａnd conductive dust

Weight 1700g

MechanicalDimension (mm)