XH1218龍門加工中心

密肋雙層箱式底座、階梯式蜂窩橫梁、大跨距高剛性直線滾動導軌，確保Y軸、Z軸靜態剛性與動態精度。
Multi rib double-layer box base, stepped honeycomb beam, large span and high rigidity linear rolling
guide rail ensure the static rigidity and dynamic accuracy of Y- -axis and z-axis.
滑座上軌道三個高剛性滑塊，下軌道四個高剛性滑塊，主軸頭Z向移動配置雙缸氨氣平衡系統，切削中實現自動平衡移動快速靈活平穩。
There are three high rigid sliders in the upper track and four high rigid sliders in the lower track of the
sliding seat. The z-direction movement of the spindle head is equipped with a double cylinder nitrogen
balance system. The automatic balance movement is fast, flexible and stable in the cutting process.
主軸中心線至導軌距離比立式加工中心靠近50%;工作臺移動時*承重在底座支承面;剛性與穩定性比大.
機型立式加工中心好。重切削精度尤顯優良。
The distance between the center line of the spindle and the guide rail is 50% closer than that of the
vertical machining center; when the worktable moves, it bears * of the load on the bearing surface
of the base; its rigidity and stability are better than that of the vertical machining center of large machines.
The precision of heavy cutting is especially excellent.
X、Y、Z軸皆使用精密級大直徑絲桿，并予以適當預壓，尾端并采用預拉設計。
X axis, Y axis and Z axis are all precision large diameter screw rods, and they are pre pressed properly.
The tail end is pre pulled. .
三軸皆采用精密級超重載線軌，確保高精度、高承載之加工要求。
All three axles are precision class super heavy duty rail, which ensures the machining requirements of
high precision and high load.

XH1218龍門加工中心