| MODEL | DY-1600G | DY-1700G | DY-1800G | DY-1900G | DY-2000G |
|---|
| SWING | Distance Between Centers | 2000 / 3000 / 4000 / 5000 / 6000 / 7000 / 8000 / 9000 / 10000 / 11000 / 12000 / 13000 / 14000 / 15000 / 16000 / 17000 / 18000 / 19000 / 20000 / 21000 / 22000 / 23000 / 24000 / 25000mm (Within 40000 is avaiable) |
|---|
| Height of Center (Over Bed) | 800 mm | 850 mm | 900 mm | 950 mm | 1000 mm |
| Swing Over Bed | 1600 mm | 1700 mm | 1800 mm | 1900 mm | 2000 mm |
| Swing Over Cross Slide | 1230 mm | 1330 mm | 1430 mm | 1530 mm | 1630 mm |
| Swing Over Gap | 1900 x 750 | 2000 x 750 | 2100 x 750 | 2200 x 750 | 2300 x 750 |
| BED | Width | 888 mm |
|---|
| HEADSTOCK | Spindle Nose | A2-11 orA2-15 or A2-20 or A2-28 ISO |
|---|
| Spindle Bore | 165 or 230 or 310 or410 mm |
| Spindle Speed (rpm) | 5 ~ 400 rpm |
| Number of Spindle Speed | 12 steps |
| FEEDS - THREAD | Leadscrew | Ø58 mm. 2T.P.I. or 12 pitch |
|---|
| Longitudinal Feed Range | 0.0100 ~ 1.4145 mm/rev |
| Cross Feed Range | 0.0102 ~ 0.5735 mm/rev |
| Inch Threads | 35 Kinds, 1 ~ 59 T.P.I |
| Metric Threads | 34 Kinds, 0.8 ~ 18mm |
| TOOL SLIDE | Cross Slide Travel | 1000 mm |
|---|
| Compound Rest Travel | 350 mm |
| TAILSTOCK | Quill Travel | 400 mm |
|---|
| Quill Diameter | 220 mm / 295 mm (OPT.) |
| Taper of Center | MT#6 / MT#7(opt.) |
| MOTOR | Main Motor | 50 HP x 4P |
|---|
| Rapid Feed Motor | 1/2 HP |
| Coolant Pump | 1/2 HP |
| Length (mm) | 4500 / 5500 / 6500 / 7500 / 8500 / 9500 / 10500 / 11500 / 12500 / 13500 / 14500 / 15500 / 16500 / 17500 / 18500 / 19500 / 20500 / 21500 / 22500 / 23500 / 24500 / 25500 / 26500 / 27500 |
|---|
| Width (mm) | 2200 |
|---|
| Height (mm) | 2400 | 2500 | 2600 | 2700 | 2800 |
|---|
| N.W (kg) | 11000 / 13000 / 15000 / 17000 / 19000 / 21000 / 23000 / 25000 / 27000 / 29000 / 31000 / 33000 / 35000 / 37000 / 39000 / 41000 / 43000 / 45000 / 47000 / 49000 / 51000 / 53000 / 55000 / 57000 |
|---|
機床商務網
機床商務網