機床商務網(wǎng)
詳細介紹
| MODEL | DY-410VS | DY-510VS | ||
|---|---|---|---|---|
| SWING | Distance Between Centers | 1000 / 1500 mm | 1100 / 1600 / 2100 / 3100 mm | |
| Swing Over Bed | 410 mm | 510 mm | ||
| Swing Over Cross Slide | 230 mm | 320 mm | ||
| Swing Over Gap | 640 mm | 760 mm | ||
| Height of Center (Over Bed) | 205 mm | 255 mm | ||
| BED | Width | 305 mm | 330 mm | |
| HEADSTOCK | Spindle Nose & Bore | D1-6 54 mm | D1-8, 80 mm | 102mm (Opt) |
| Spindle Speed (rpm) | L: 25 ~ 350 M: 70 ~ 1000 H: 180 ~ 2700 | L:60 ~ 230 M: 170 ~ 680 H: 550 ~2000 | L: 50 ~ 220 M: 120 ~ 650 H: 220 ~ 1800 | |
| FEEDS - THREAD | Leadscrew | Ø35 mm. 4T.P.I. or 6 pitch | ||
| Number of Feed Changes | 32 | |||
| Longitudinal Feed Range | 0.04 ~ 1.0 mm/rev | |||
| Cross Feed Range | with rapid traverse: 0.02-0.5 mm/rev ; without rapid traverse: 0.04-1.0 mm/rev | |||
| Inch Threads | 37 Kinds, 2 ~ 56 T.P.I | |||
| Metric Threads | 41 Kinds, P0.2 ~ 14 | |||
| D.P. No. / range | 19 Kinds D.P 8 ~ 44 | |||
| Module Pitches No. / Range | 18 Kinds M 0.3 ~ 3.5 | |||
| TOOL SLIDE | Cross Slide Travel | 240 mm | 260 mm | |
| Compound Rest Travel | 95 mm | 127 mm | ||
| TAILSTOCK | Quill Travel | 120 mm | 130 mm | |
| Quill Diameter | 65 mm | 75 mm | ||
| Taper of Center | MT#4 | MT#5 | ||
| MOTOR | Main Motor | 7.5 hp / 10 hp (Opt) | 10 hp / 12.5 hp (Opt) | |
| Coolant Pump | 1/8 hp | |||
| Length (mm) | 2400 / 2900mm | 2470 / 2970 / 3470/3970mm | ||
| Width (mm) | 1100 | 1100 | ||
| Height (mm) | 1800 | 1880 | ||
| N.W (kg) | 1700 / 2000Kgs | /2000 / 2300 / 2800 / 3600Kgs | ||
| Workpiece Weight Capacity | Chuck only | Chuck + Tailstock | Chuck + 1 Steady rest + Tailstock | Chuck + 2 Steady rest + Tailstock | |||
|---|---|---|---|---|---|---|---|
| Spindle bore 54mm | 80kg | 300kg | 450kg | 700kg | |||
| Spindle bore 80-102mm | 300kg | 800kg | 1000kg | 1500kg | |||
| * Above specifications are subject to change without notice. Special requirement please connect with us. | |||||||
機床商務網(wǎng)