機床商務網
詳細介紹
| MODEL | DY-560VS | DY-660VS | DY-760VS | ||
|---|---|---|---|---|---|
| SWING | Distance Between Centers | 1000 / 1500 / 2000 / 2500 / 3000 / 4000 / 5000 / 6000 mm | |||
| Swing Over Bed | 560 mm | 660 mm | 760 mm | ||
| Swing Over Cross Slide | 310 mm | 410 mm | 510 mm | ||
| Swing Over Gap | 800 mm | 900 mm | 1000 mm | ||
| Height of Center (Over Bed) | 280 mm | 330 mm | 380 mm | ||
| BED | Width | 410 mm | |||
| HEADSTOCK | Spindle Nose & Bore | D1-8, 104mm | D1-11, 130mm | A2-11, 150mm | |
| Spindle Speed (rpm) | L: 50 ~ 220, H: 330 ~ 1500 | L: 50 ~ 140, H: 350 ~ 1000 | L: 50 ~ 140, H: 350 ~ 1000 | ||
| FEEDS - THREAD | Leadscrew | Ø45 mm. 2T.P.I. or 6 pitch | |||
| Number of Feed Changes | 36 | ||||
| Longitudinal Feed Range | 0.05 ~ 0.7 mm/rev | ||||
| Cross Feed Range | 0.025 ~ 0.35 mm/rev | ||||
| Inch Threads | 2 ~ 28 T.P.I | ||||
| Metric Threads | P0.8 ~ 14 mm | ||||
| D.P. No. / range | 4 ~ 56 D.P | ||||
| Module Pitches No. / Range | 0.5 ~ 7 MOD | ||||
| TOOL SLIDE | Cross Slide Travel | 380 mm | |||
| Top Slide Travel | 255 mm | ||||
| TAILSTOCK | Quill Travel | 180 mm | |||
| Quill Diameter | 75 mm | ||||
| Taper of Center | MT#5 | ||||
| MOTOR | Main Motor | 15hp / 20hp (Opt.) | |||
| Coolant Pump | 1/8 hp | ||||
| Length (mm) | 2800 / 3300 / 3800 / 4300 / 4800 / 5800 / 6800 / 7800mm | ||||
| Width (mm) | 1400 | ||||
| Height (mm) | 1530 | 1630 | 1730 | ||
| N.W (kg) | 2400 / 2700 / 3000 / 3300 / 3700 / 4500 / 5200 / 6000kg | ||||
| Workpiece Weight Capacity | Chuck only | Chuck + Tailstock | Chuck + 1 Steady rest + Tailstock | Chuck + 2 Steady rest + Tailstock | |||
|---|---|---|---|---|---|---|---|
| Spindle bore 104mm | 500kg | 1200kg | 2000kg | 3000kg | |||
| Spindle bore 130-150mm | 600kg | 1300kg | 2100kg | 3100kg | |||
| * Above specifications are subject to change without notice. Special requirement please connect with us. | |||||||
機床商務網